Garmin Intelliducer NMEA 2000 Instrucciones De Instalación página 10

Step 5�: �pdate Your Chartplotter : �pdate Your Chartplotter
If you are using the Intelliducer with an existing Garmin chartplotter, upgrade your Garmin
chartplotter with the latest software to ensure compatibility with the Intelliducer. For more
information, visit www.garmin.com.
Maintenance
You must regularly maintain and clean your Intelliducer to get the best results.
Antifouling paint
If you are using the Intelliducer in salt water, you must coat the submerged surface of the
Intelliducer with antifouling paint. Use only water-based antifouling paint, because other paints
may damage the Intelliducer. Re-apply the paint at the beginning of each season.
Cleaning
Clean the submerged surface of the Intelliducer regularly to keep it clear of aquatic growth. The
performance of the Intelliducer will be greatly reduced if the surface collects a large amount of
growth. Use a scour pad (lightly) and a mild detergent to clean the surface. Avoid scratching the
surface as much as possible.
Specifications
Physical
unit Dimensions:
Weight:
Cables:
temperature range: From -15°C to 33°C (from 5°F to 91°F)
Case Material:
Power
Power input source: NMEA 2000 — 9–16 Vdc
Fuse (NMeA 0183): 2 A
Main power usage:
NMeA 2000 Load equivalency Number (LeN): 4
Sonar
Power:
Frequency:
Depth:
10
4 / in. (116.3 mm) L × 4 in. (101.4 mm) W × 3 in. (76.2 mm) D
19
32
13 oz. (364 g)
NMEA 2000 drop cable — 19 ft. 8 in. (6 m)
NMEA 0183 power/data cable — 29 ft. 6 in. (9 m)
PC/PBT and ASA plastic
NMEA 0183 — 9–33 Vdc
2 W max
150 W (RMS), 1,200 W (peak-to-peak)
160 kHz
900 ft. (275 m) (Depth capacity is dependent on water salinity, bottom
type, and other water conditions.)
Thru-Hull Intelliducer Installation Instructions