Jacuzzi BUILDER Serie Manual De Instalación Y Operación página 24

UNDERMOUNT INSTALLATION INSTRUCTIONS
Position the counter on top of the bath to ensure correct
fit and appearance. Make any adjustments that may be
necessary. Remove the counter.
Adhering Counter to Bath
Clean any dirt or debris from the bath rim. Do not use
abrasive cleaners.
Where the counter will make contact with top of the bath
rim, apply a bead of silicone sealant.
CAUTION: Do not use an adhesive or adhesive
sealant to secure the counter to the bath rim. If
maintenance or remodelling is required the counter
may have to be removed. Adhesive will permanently
bond the counter to the bath. This will make removal
difficult and costly and may cause damage to the
counter or bath.
Carefully position the counter onto the bath rim. The
counter will need to be held in place while the sealant
cures. Follow the manufacturer's instructions to deter-
mine time required for curing.
Apply a continuous bead of silicone sealant around the
entire seam between the counter and bath rim. Allow
sealant to skin over or cure before cleaning the counter
or bath.
Jacuzzi Whirlpool Bath© K272000AC 12/04
BATH
BATH
WEIGHTS
18
COUNTER
APPLY SILICONE
SEALANT TO TOP
OF BATH RIM
COUNTER
APPLY SILICONE SEALANT