OHAUS Defender 5000 Serie Manual De Instrucciones página 33

Defender 5000 Indicators
3.9.2.5 MT-Continuous
If MT-Continuous is selected, the print output will be in the MT-Continuous format.
CONTINUOUS = printing occurs continuously.
Note: Refer to Appendix A for MT-Continuous format.
3.9.2.6 OH-Continuous
If OH-Continuous is selected, the print output will be in the OH-Continuous format.
Note: Refer to Appendix A for OH-Continuous format.
CONTINUOUS = printing occurs continuously.
3.9.2.7 SICS
OFF = disable MT-SICS command
ON = enable MT-SICS command
Note: Refer to Appendix B for SICS commands.
3.9.2.8 Reference Balance
OFF = do not connect to reference balance
ON = connect to reference balance
Note: Use a reference balance to perform sampling with a high resolution balance in Counting Mode.
Please make sure the balance is already switched on before connected to the TD52 indicator.
3.9.2.9 Select Template
This sub-menu is used to define the format of the data output to a printer or computer.
Simple = only prints result and unit
Custom 1 = customized printout format. If not customized, Simple template will be used
Custom 2 = customized printout format. If not customized, Simple template will be used
Custom 3 = customized printout format. If not customized, Simple template will be used
Custom 4 = customized printout format. If not customized, Simple template will be used
Custom 5 = customized printout format. If not customized, Simple template will be used
Example (Simple Template):
1.000 kg G
N
T
3.9.2.10 Edit Template
This sub-menu is used to edit the current Print template. Each template supports up to 50 data fields
to define the format of the data output.
Select the string number in the first selection box then any existing data for that string will be shown
in the second entry box. Using the alphanumeric keys, enter or edit the characters to be used as the
selected string.
To format a template, first select the field number (from 1 to 50) in the first selection box then select
the item for that field in the second selection box. Using this method, a template of up to 50 fields
can be created. To terminate a template, an End of Template field must be included. All fields after
the End of Template field will be ignored.
EN-31