Technibel KPSW Manual De Instalación página 12

F MARKING
This product marked
- Low voltage no. 2006/95/CE,
GB
- Electromagnetic Compatibility no. 89/336 EEC, modifi ed 92/31 and 93/68 EEC.
I
E
CONTENTS
D
1 - GENERAL
1.1 - FOREWORD
• The equipment must be installed, started-up and maintained
by authorised and qualifi ed personnel, in accordance with
local rules and professional standards.
1.2 - GENERAL SUPPLY CONDITIONS
• Generally speaking, the material is transported at the
consignee's risk.
• The consignee must immediately provide the carrier with
written reserves if he fi nds any damage caused during
transport.
1.3 - VOLTAGE
• Before any operation, check that the voltage and the
frequency indicated on the device corresponds with that
of the mains.
2 - PRESENTATION
• See technical documentation.
2.1 - DESCRIPTION
2
3
4
1
5
2
conforms to the essential requirements of the European Directives:
1 - General ................................................................................. 2
2 - Presentation ......................................................................... 2
3 - Installation ............................................................................ 3
4 - Connections / Wiring diagrams ............................................. 7
5 - Accessories .......................................................................... 9
6 - Starting ................................................................................. 9
7 - Maintenance ......................................................................... 9
1 - Air inlet (suction)
2 - Air outlet (blowing)
3 - Vertical defl ection louvre
4 - Horizontal defl ection louvre
5 - Air fi lters
1.4 - PRECAUTIONS
1.4.1 - HYDRAULIC CIRCUIT
- Minimum water inlet temperature : 4°C.
- Maximum water inlet temperature : 60°C.
- Maximum operating pressure
1.4.2 - AMBIENT AIR
- Minimum air recirculation temperature : 5°C.
- Maximum air recirculation temperature : 32°C.
Important: During installation shut-down, in case of ambient
temperature near 0°C, there is a risk that the hoses may freeze.
Envisage draining the hydraulic circuit.
1.5 - USE OF EQUIPMENT
• This equipment is intented for the air-conditioning of
premises and to provide comfort for the personnel.
1.6 - MODELS
• "2-pipe" for all sizes.
3 4
2
1
Materials:
: 16 bar.
5
• Painted metal frame.
• Plastic body.
• Copper pipping.