Appendix A Specifications; Table A-1 Specifications - Ohio Medical Corporation MiniOX 3000 Manual De Instrucciones

MiniOX 3000 Oxygen Monitor
®
Appendix A
Specifications
O Alarm LOW/HIGH O
2
System ALARM
Accuracy
Linearity
Nominal Response Time (O
directed at sensor at 2 liters per
minute at RTP)
Sensor Life
Sensor Shelf Life
Battery Life
Operating Temperature Range
Storage Temperature
Humidity
INSTRUMENT
Dimensions
SENSOR
STAGE 1
Battery Alarm
System
STAGE 2
*RTP: Room temperature and pressure, e.g., 23
pressure
A-1

Table A-1 Specifications

Pulsating alarm, flashing LEDs
2
+ 1% of full scale (RTP*) as calibrated in the environment of use
(total accuracy, including linearity, is 2%)
+ 1% of full scale (RTP*)
90% in 20 seconds
2
97% in 30 seconds
Over one year in normal medical conditions
Six months minimum (stored in sealed package)
Approximately 1500 device hours, assuming 80% ON, 20% OFF
0 C to 40 C (32 F to 104
o o o
-40 C to 70 C (-40
o o
5% to 95% RH (non-condensing)
152 x 83 x 33 mm (5.98 x 3.26 x 1.31 in.)
OD 30.56 mm (1.2 in.); Length: 43.2 mm (1.7 in.)
Warning that approximately six hours of monitoring life remain; LOW BAT
appears on display; beep sounds every 30 seconds until battery is replaced or
Stage 2 occurs.
Alarm that proper operation is not assured; monitor shuts down, audible and
visual alarms are activated.
711449 (Rev.3) 02/2016
F)
o
F to 158 F)
o o
C + 3 and ambient barometric
o o
Appendix A, Specifications