CSC50-ER Phone will dial the next emergency connect SOS number automatically.
NOTE: The friend, relative or neighbor whom you have chosen are required to have touch-
tone phone service and a phone that will generate touch-tone code.
Test the CSC50-ER emergency connect phone
1. Make sure the phone numbers and your message have been entered.
2. Call your friends, family or neighbors to let them know you are going to test the
CSC50-ER. Be sure that they understand that this is not a real emergency.
3. After you hang up the phone, press the Remote Band's Emergency Connect But-
ton.
4. The CSC50-ER will dial the first phone number. Shortly after it dials the number, the
CSC50-ER starts to play its message.
5. If the person it calls doesn't answer within about 30 seconds or answers but doesn't
press a number key, the CSC50-ER calls the next number. If the called person
presses a number key on the phone, the recorded message stops and he/she can
listen in as well as speak directly to you through the speakerphone.
6. To turn off or hang up, press
phone base.
Test your CSC50-ER emergency connect remote band every month
At least once per month you should test your remote band's emergency connect button by
following the directions above.
If your remote band does not work reliably from locations where it has worked before, you
should immediately replace the battery
antenna is in its proper placement.
To Cancel The CSC50-ER Emergency Connect Call
In case of a false alarm or mistaken activation, press the
CSC50-ER phone base or on the remote band.
Advanced CSC50-ER Emergency Connect
REMOTE AUDIO MONITORING
If a family member or friend to whom you've given your Monitor Access Code becomes
worried about you or wants to call back after they have called 911 for help, this feature
allows them to call you. They can turn on the speakerphone of your CSC50-ER remotely
and listen in or talk to you. If everything is all right, you just answer the phone in a normal
manner. If you need assistance, they can stay on the line until help arrives.
18
or
X
STOP
(see page #37)
Phone Operation
button on your band remote or on the
and check to be sure the phone's
STOP
or
button on the
X