Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
1
Removing the old toilet
□
Turn off the water supply and flush the tank completely. Towel
or sponge remaining water from the tank and bowl.
□
Disconnect and remove the old water supply line.
□
Remove the bowl from the floor by removing the bolt caps and
the floor bolt nuts.
□
Remove the floor bolts from the toilet flange and clean old wax,
putty, and sealant from the base area.
□
Temporarily plug the floor flange with a towel or cover to block
sewer gases from escaping.
NOTE: The mounting surface must be clean and level
before the new toilet is installed.
2
Installing the floor bolts
□
Insert the floor bolts (AA) into the slots on the toilet flange (1)
with the bolt heads down and threaded ends facing up. The
heads of the floor bolts (AA) should be perpendicular to the slot
opening in the toilet flange.
Ensure the floor bolts (AA) are parallel to the wall. When set,
□
hand-tighten the hex nuts (BB) onto the floor bolts (AA) to
secure.
5
Please contact 1-855-434-5224 for further assistance.
HOMEDEPOT.COM
Capítulos
Tabla de contenido
