Self-Cleaning Cycle - Kenmore 911.36655 El Manual Del Propietario

CARE ANDCLEANING
Self-Cleaning Cycle
1. Press the CLEAN pad. The display
will show "CLEAN", "TIME", and
(....).
After the cycle, you may notice some
white ash in the oven..Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-filled steel wool pad Be
sure to rinse thoroughly,, These are
usually deposits of salt that cannot
be removed during the cycle.
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle,
2. Press the UP or DOWN arrow pad
to select the amount of time you
want the oven to clean. The normal
cycle is 3 hours, but you can choose
between 2 and 4 hours,
You can press the STOP TIME pad to
see the time of day the clean cycle will
be finished. Press the CLEAN pad to
return to the countdown.
Simply press the CLEAR]OFF pad.
You will need to wait for the oven
temperature to drop below the lock
temperature (approx, 1 hour) before
attempting to open the door
You will not need to determine when the
oven will turn on, when setting this
function The control wilf do this for you
You will need to set the amount of time
you want your oven to clean (between 2
and 4 hours), and the time of day when
you want the oven to turn off
1. Press the CLEAN pad The display
will show "CLEAN", "TIME" and
I--I
2, Press either the UP or DOWN
arrow pad to select the amount of
time you want the oven to clean
The normal cycle is 3 hours but you
may choose between 2 and 4 hours
3. Press the STOP TIME pad.
4, Press either the UP or DOWN
arrow pad to select the time of day
you want the cycle to end and the
oven to turn off.
Make sure your oven light is off during
a self-clean cycle to prolong the life of
the bulb.
I7