G : Gasleak And Finalisation Of Qinstallation; H : Emergency Switch Use - Farelek 112503 Manual De Instrucciones

G : GASLEAK and FINALISATION OF INSTALLATION
G1- First test
• Put soapy water or bleed detector spray on the connector
• Be sure that no small bubbles appearead which indicated gas bleed.
G2- Second test :
• redo one more time this operation after switch on during one hour running
•If you do not have any escapes, you can finalize the installation.
G3- Finalisation of installation
1
• Bind the assembly with the roll
of plastic film, using a tightening
force to keep it in firmly place.

H : EMERGENCY SWITCH USE

•Only on the models which are equipped with it.
• If the remote control batteries are uncharged or the remote control has a fault, use the safety switch.
112503-112511-new.indd 46
© FAR GROUP EUROPE
.
2
• Put the two half-shells in place,
then finish the interior blocking
with mastic or expanded foam.
en
18/12/07 16:52:49