Function Setting; Select Channel - TECshow Nebula FX 3-in-1 Manual De Usuario

•
There are total four operating buttons on the con-
trol panel, you can simply set the starting address, run the
pre-programmed program or make a reset.
•
<Mode/Esc>:Used to scroll through the current
operating mode, as well as back out of the current
menu option.
•
<Up>: Used to select increasing advancement in
the value.
•
<Down>: Used to select decreasing advancement
in the value.
•
<Enter>: Used to select a value and store it to
memory.
•
The control panel shows the current state of the
unit. It is used to select the operating mode, as well as the
sub-features. For a detailed lay out of the control panel
functions, please see the following page.
P. 6
NEBULA FX 3 IN ONE
ENGLISH VERSION

4. Function setting

Set DMX address
Press MENU to enter EDIT interface
1.
Press UP/DOWN to choose, then press ENTER to en-
2.
ter Address setting
3. Press Up/Down to choose address 001~XXX
4. Press ENTER to confirm, or press "MENU" to exit

Select channel

Press MENU to enter EDIT interface
1.
Press UP/DOWN to choose, then press ENTER to
2.
enter Chnd
3. Press UP/DOWN to choose 7CH or 34CH
4. Press ENTER to confirm, or press "MENU" to exit