Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Introduction
•
Thank you for using Nebula Fx 3 in One. For your
own safety, please read this user manual carefully
before installing the device.
•
Keep this device away from rain and moisture.
Unplug mains lead before opening the housing.
Damages caused by the disregard of this user man-
ual are not subject to warranty.
•
The dealer will not accept liability for any result-
ing defects or problems.
What's inside
•
•
Fixture 1 piece
•
User Manual 1 set
•
Power Cable 1 piece
•
DMX cable
•
Handle 1 set
1.
Before delivery, this device has passed strict in-
spection, Please follow the user manual strictly
for operation, if this fixture is damaged by im
proper operation and mistake, the fixture will be
out of warranty, and manufacture or dealer won't
be responsible for it. In case of any technology
change in this manual,we won't advise in further .
2.
If the device has been exposed to temperature
changes due to environmental changes, do not
switch it on immediately. The arising condensa-
tion could damage the device. Leave the device
switched o until it has reached room temp.
3.
Please replace housing if it is broken. This fixture
can be using a er finished installed.
4.
The electric connection must carry out by quali-
fied person.
5.
Make sure that the available voltage is not higher
than stated at the end of this manual.
6.
Make sure the power cord is never crimped or
damaged by sharp edges. If this would be the
case, replacement of the cable must be done by
an authorized dealer.
7.
If the external flexible cable or cord of this lumi-
naire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a sim-
ilar qualified person in order to avoid a hazard.
8.
Please cut o the power if don't use the fixture or
want to clean, maintenance.
9.
Please be aware that damages caused by manu-
al modifications to the device are not subject to
warranty. Keep away from non-professionals.
Installation Instructions
10.
The applicable temperature for the lighting is
between -10°C to 45°C. Do not use the lighting un-
der or above the temperature.
11.
The installation of the e ect has to be built and
constructed in a way that it can hold 10 times the
weight for 1 hr without any harming deformation.
12.
The installation must always be secured with a
secondary safety attachment. Never stand direct-
ly below the device when mounting, removing or
servicing the fixture.
13.
The operator has to make sure the safety relating
and machine technical installations are approved
by an expert before taking the device into opera-
tion for the first time.
14.
These installations have to be approved by a
skilled person once a year.
15.
Overhead mounting requires extensive experi-
ence, including amougst others calculating work-
ing load limits, installation material being used,
and periodic safety inspection of all installation
material and the device. If you lack these qualifi-
cations, do not attempt the installation yourself.
Improper installation can result in bodily injury.
P. 3
NEBULA FX 3 IN 1
ENGLISH VERSION
Tabla de contenido
