Fitting The Air Conditioner On Bracket - MAXA 2600 W STD Manual Usuario Y Instalador

2.7 FITTING THE AIR CONDITIONER ON BRACKET

After checking again that the fastening bracket is securely fastened to the wall, and that any necessary preparations
for electric connection and condensate drainage (if it needs) have been made, fasten the air conditioner to its
supporting bracket.
Lift it up by holding the sides at the bottom. Tilt the air conditioner slightly toward you to facilitate the operation of
fastening it to the bracket.
The air conditioner can now be pushed firmly against the wall. Inspect carefully the to make sure that the insulating
back panel must fit firmly against the wall and there are no fissures at the back of the air conditioner and that the two
plastic semicircle on the back side of the air conditioner are placed inside of the two plastic hoses fixed inside the
wall.
- The appliance shall not be installed the laundry.
- The appliance must be positioned so that the plug is accessible.
- The appliance shall be installed in accordance with national wiring regulations.
21