Wire Range - Lenze E94ASHE Serie Instrucciones Para El Montaje

4 Mounting the device

Wire range

4.2 Wire range
The wire range is protected against contact by means of several plates. All plates can be
removed so that the cables can be connected easier.
If required, the cables can also be connected without removing the plates if the cable
entries are bent or broken open.
With a device of size X8 the angle for strain relief and/or shield connection can be mounted
inside or outside:
Internal mounting: When single cores are used
ƒ
External mounting: When multi-core cables are used, can also be shielded
ƒ
Device size 8S
80
Top/front cover
Bottom/back cover
Knockout cable entry - mains

Knockout cable entry - DC bus

Knockout cable entry - brake resistor

Knockout cable entry - motor

Shield connection and/or strain relief, can be optionally mounted inside (in case of single

cores) or outside (multi-core cables).
Barrier between mains input and other power terminals


SSP94KE0X8
EDK94SH366 DE/EN/FR/ES/IT 3.1