Palazzetti ECOFIRE BELLA IDRO Generalidades - Advertencias - Instalación - Mantenimiento página 29

5.5.1 Discharge through roof using a traditional
chimney
made in accordance with standards UNI 10683 - EN
1856-1-2 - EN 1857 - EN 1443 - EN 13384-1 - EN
12391-1 both as regards the dimensions and the
construction materials used.
DAMAGED chimneys made from unsuitable
material (asbestos cement, galvanised steel,
etc.... with a rough and porous inside surface) are
prohibited by law and affect proper stove operation.
For larger chimneys, suitably insulated steel
pipes need to be inserted on the inside (diameter
according to the length).
Makes sure connections to chimneys are suitably
sealed (Fig. 5.8).
available on the market.
It is possible to install the stove with upper or
necessary to remove the upper collar and replace
side cap will be screwed on top.
To do this, remove the top cover and the side panel
by removing the side section.. Unscrew the three
screws of the cap making sure to remove it from
the inside of the stove. Replace the two elements
together.
B
A) Chimney pot with wind protection
B) Seal
C) Inspection