Cebora SOUND MIG MIG 3540/T STAR PULSE Manual De Instrucciones página 14

AA AB AC
AI AO AP
Knob AI.
The following values are set according to the process
type :
Welding current A, wire speed (
gram number PRG.
In MIG welding processes, the service functions
select the abbreviations: H2O, TRG, SP, HSA, CrA,
PrF, PoF, Acc, bb, L, Dp, Ito, Fac.
In MIG welding processes, the service functions select
the abbreviations: H2O, TRG, SLD, PrF, PoF, Fac.
In MMA welding processes, the service functions select
the abbreviations: HS, AF, SP, Fac.
In MIG synergic processes when a value is adjusted the
other values are adjusted as well. All these values are
shown on the display AL.
Knob AN.
The following values are set according to theprocess type :
In synergic MIG the arc length, in conventional MIG the
welding voltage.
Inside the service menu, according to the value set by
knob AI it selects the set value, the activation or desacti-
vation of the same, or an additional selection to be made
inside the fuction.
Display AL.
In all welding processes, it numerically displays the selec-
tions made via the selection key AE and adjusted via the
knob AI.
For the welding current (LED AD) it displays the amperes.
For the wire speed (LED AC) it displays the meters per
minute.
For the thickness (LED AB) it displays the millimeters.
For (LED AA) it displays the set program number.
In MIG welding processes, the service functions select
14
AD AE AL AF
AQ AR AS AT
), thickness (
AG
AU AV
the abbreviations: H2O, TRG, SP, HSA, CrA, PrF, PoF,
Acc, bb, L, Dp, Ito, Fac.
In MIG welding processes, the service functions select
the abbreviations: H2O, TRG, SLD, PrF, PoF, Fac.
), pro-
In MMA welding processes, the service functions select
the abbreviations: HS, AF, SP, Fac.
For the parameters within the service functions that are
shown on the display AM, see the paragraph on service
functions.
When the machine is in the warning mode, it displays a
flashing warning (exemple: OPN if the lateral panel is open.
When the machine is in the error mode it displays Err.
Display AM.
In all welding processes displays by the number: in syn-
ergic MIG the arc length and in conventional MIG the
welding voltage.
For the welding voltage (LED AH) it displays the Volts. For
the arc length (LED AHoff) it displays a number between
9.9 and +9.9, 0 being the recommened value.
For the parameters in the MIG service function, that are
shown on the display AM, see the paragraph on service
functions .
For the parameters in the MMA and TIG service function,
that are shown on the display AM, see the paragraph on
service functions .
When the machine is in error mode it displays the corre-
sponding error code between 1 and 99.
Selection key AO.
Each time this key is pressed, the selected process is
shown by LED AP/AQ/AR/AS/AT.
LED AP Pulsed MIG.
Shows that the selected process is the synergic MIG
Pulsed.
AH AM
AZ AY
AN
Fig. 2
AW