Securing Child; Canopy - Nuna pipa icon Manual De Instrucciones

Securing Child

Use Infant Insert
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend
using the full infant
insert while the baby
is under 60 cm or
until they outgrow
the insert. The infant
Remove the infant
insert increases side
insert cushion by
impact protection.
detaching the snaps
to allow more space
when the infant does
not t comfortably.
After the child is placed into the seat, check whether the Shoulder
Harness Straps are at proper height.
1 While pressing the adjustment button located at the front of
the PIPA icon infant child restraint, pull completely the two
Shoulder Harness Straps of the PIPA icon infant child restraint.
(22)
2 Unlock the buckle of the harnesses by pressing the red button.
(23)
3 Place the child into the PIPA icon infant child restraint and lock
(25)
the buckle. Please refer to.
4 Tighten the shoulder harness straps by pulling the adjustment
(26)
webbing.
Make sure the space between the child and the Shoulder
Harness Straps is about the thickness of one hand.
23
Remove the head
support portion of
the infant insert
when the child's
head no longer ts
comfortably.
Remove the body
portion of the infant
insert when the
infant's shoulders no
longer t comfortably.
1
The cushion can
be used separately
without being
attached to the
insert to bolster
2
the infant's back
for more comfort.
(24)

Canopy

1 Unzip the zipper behind the front canopy bow.
2 Pull the canopy out of the compartment.
3 Attach the magnets on each corner to the front of the PIPA
(29)
icon infant child restraint.
4 The zipper on the back of canopy can be opened for
(30)
ventilation.
(27)
(28)
24