Kenmore 106 Manual De Uso Y Cuidado página 20

Refrigerador con montaje superior
Ocultar thumbs Ver también para 106:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4. Plug in refrigerator or reconnect power.
To change freezer light:
(on some models)
1. Unplug refrigerator or disconnect power.
2. Reach behind light shield to remove bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Plug in refrigerator or reconnect power.
.... _®
' ....
If the electricity in your house goes off, call the power
company and ask how long it will be off.
1. If the power will be out for 24 hours or less, keep both
refrigerator
doors closed to help foods stay cold and
frozen.
2. If the power will be out for more than 24 hours:
a) Remove all frozen food and store it in a frozen food
locker.
OR
b)
Place 2 Ibs (907 g) of dry ice in the freezer for every
cubic foot (28 L) of freezer space. This will keep the
food frozen for two to four days. While handling dry
ice, wear gloves to protect your hands from ice
burns.
OR
c) If neither a food locker nor dry ice is available,
consume or can perishable food at once.
REMEMBER:
A full freezer stays cold longer than a
partially filled one. A freezer full of meat stays cold longer
than a freezer full of baked goods. If you see that food
contains ice crystals, it may be safely refrozen, although
the quality and flavor may be affected. If the condition of
the food is poor, or if you feel it is unsafe, dispose of it.
Vacations
If you choose to leave the refrigerator on while you're
away, use these steps to prepare your refrigerator before
you leave.
1. Use up any perishables and freeze other items.
2. If your refrigerator has an automatic ice maker:
Raise wire shut-off arm to OFF (up) position.
Shut off water supply to the ice maker.
3. Empty the ice bin.
If you choose to turn the refrigerator off before you
leave, follow these steps.
1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice maker:
Turn off the water supply to the ice maker at least
one day ahead of time.
When the last load of ice drops, raise the wire shut-
off arm to the OFF (up) position.
3. Depending on your model, turn the Thermostat Control
(or Refrigerator Control, depending on the model) to
OFE See the "Setting the Controls" section.
4. Clean refrigerator, wipe it, and dry well.
5. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.
20
Tabla de contenido
loading

Tabla de contenido