Symbols; Instructions; Protection Mechanisms - koban KMD 02 Manual Del Usuario

KMD 02
Digital multimeter
produce false readings that can lead
to electric shock a person injury.
* Do not measure voltages above
600V in category III installations.
* Do not operate the Meter with the
case (or part of the case) removed.

Symbols

Symbols used in this manual and on
the instrument:
Caution: refer to the
instruction manual.
Incorrect use may result in
damage to the device or its
components.
AC (Alternating Current)
DC (Direct Current)
Earth ground
Double insulated
Fuse
Conforms to European
Union directives

Instructions

* remove the test leads from the
Meter before opening the Meter case
or battery cover.
* When servicing the Meter, use only
specified replacement parts.
* Before opening up the instrument,
always disconnect from al sources of
Instructions manual | 26
electric current and make sure you
are not charged with static electricity,
which may destroy internal
components.
* Any adjustment, maintenance or
repair work carried out on the meter
while it is live should be carried
out only by appropriately qualified
personnel, after having taken into
account the instructions in this
present manual.
* A "qualified person" is someone
who is familiar with the installation,
construction and operation of the
equipment and the hazards involved.
He is trained and authorized to
energize and de-energize circuits
and equipment in accordance with
established practices.
* When the instrument is opened
up, remember that some internal
capacitors can retain a dangerous
potential even after the instrument is
switched off.
* lf any faults or abnormalities are
observed, take the instrument out of
service and ensure that it cannot be
used until it has been checked out.
* lf the meter is not going to be used
for a long time, take out
the battery and do not store the
meter in high temperature or high
humidity environment.
Protection mechanism
* Fused by the fuse
(FF400mA/1000V) during
www.grupotemper.com