General Advice; Recomendaciones De Carácter General - tau R14BF Manual De Uso Y Mantenimiento

Sistema de automatización para verjas con puertas batientes
Tabla de contenido

GENERAL ADVICE

Install a gate safety system that complies with current regulations
Choose short routes for cables and keep power cables separate from control ones.
Install the control card in a waterproof box.
Please refer to current regulations when setting the geared motor's maximum torque
We advise you to install an outdoor switch, in compliance with European standards on the issue of safety, to turn
the electricity off when servicing the gate.
Check that each single device installed is efficient and effective.
Affix easily readable signs, warning about the presence of a motorized gate.
RECOMENDACIONES DE CARÁCTER GENERAL
Integrar la seguridad de la verja con las normas vigentes
Elegir recorridos breves para los cables y mantener separados los cables de potencia de los de mando.
Instalar la ficha de mando dentro de una caja hermética.
Para la puesta a punto del par máximo motorreductor, respetar la normativa en vigor
De acuerdo con la normativa europea en materia de seguridad, se aconseja instalar un interruptor externo para
poder sacar la corriente cuando se deban realizar operaciones de mantenimiento de la verja. - Comprobar que
cada uno de los dispositivos funcione y sea eficaz.
Colocar carteles de fácil lectura y comprensión que informen de la presencia de una verja motorizada.
USE
The buried geared motor R14BF (R14B-R14BENC) is designed to move gates with a maximum opening length of 2
m (1.60 m).
It is categorically forbidden to use the geared motor for any other use or under circumstances different from those
mentioned herein.
The electronic unit (that must have the built-in electric clutch for the R14B version) normally makes it possible
for you to choose from:
automatic : a command pulse will open and shut the gate
semiautomatic : a command pulse will open or shut the gate
If there is a blackout the gate will work if it is equipped with a buffer battery; to control the gate manually first
operate the unlock mechanism for the R14B version.
Remember that this is an automatic device which is powered by electricity, consequently use with care. In
particular, remember:
• never touch the device with wet hands and/or wet or bare feet
• turn the electricity off prior to opening the command box and/or actuator
• do not pull the lead to pull the plug out
• do not touch the motor unless you are certain it is cold
• put the gate in movement only when it is completely visible
• keep out of the gate's range of action if it is moving: wait until it has stopped
• do not let children or animals play near the gate
• do not let children, or incapable people, use the remote control or other operating devices
• carry out routine maintenance
• in the case of a failure, turn the electricity off and work the gate manually only if it is possible and safe. Refrain
from touching the gate and call an authorized technician
10
Tabla de contenido
loading

Este manual también es adecuado para:

R14bR14benc

Tabla de contenido