Preparation For Cleaning/Disinfection - INQUA Vernebler BR021200 Manual De Instrucciones

tubing. Then, switch the base unit off, unplug the power plug
from the socket, and disconnect the connection tubing from
the compressor.

Do not use water or any other cleaning or disinfecting solu-
tions to clean the connection tubing. Replace the tubing if it is
contaminated.

5.2 Preparation for cleaning/disinfection

Directly after each treatment, all parts of the INQUA
must be cleaned of medication residue and contamination.
In order to help reduce water pollution, do not dispose of the
medication residue in the waste water system. Wipe it up with
tissues and dispose of the tissues with non-recyclable waste.

If this has not been done, discon-
nect the connection tubing from the
®
INQUA nebuliser.

Dismantle the nebuliser into its indi-
vidual parts.

Rinse all components of the nebu-
liser under running tap water.
This must be done especially thor-
oughly if cleaning and disinfection
are not carried out straight away.
en
®
nebuliser
57