Fimar SPM Uso Y Mantenimiento página 39

ICE CRUSHER
APPLIANCE CLEANING
Before cleaning the appliance (at the end of the day or when necessary) turn the power off
(or unplug the power cord).
1. Remove the cup and cover (for model ROGM only).
2. Wash parts with drinkable water, rinse and dry thoroughly and reassemble.
3. Accurately clean the work surface and all surrounding areas.
4. Clean external appliance surfaces with a damp cloth or sponge.
Caution - Precaution
Only clean with food safe detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
For long periods of disuse, after cleaning and turning off appliance power (or unplugging
the power cord), adequately cover it to keep it clean.
TROUBLESHOOTING
The purpose of the following information is to help the operator to identify and correct any
anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abilities
and must only be performed by qualified personnel with recognised experience in the spe-
cific sector.
Important
Do not remove internal appliance parts. The manufacturer is not liable for any ma-
chine tampering!
Table 8: Operating malfunctions
Problem
The equipment does not start.
Causes
Main switch off.
No mains power.
The presser was not lowered (for
model TRL only).
Fuse burnt-out.
- 17 -
TRL-ROGM
Solutions
Turn on main switch.
Contact your dealer or authorised
service centre.
Lower the presser.
Contact customer service.
EN