Safety Information; Declaration Of Conformity - EdilKamin IRIS PLUS Instalación Uso Y Mantenimiento

sk tecnica irisplus multilingua_ristampa052009.qxp 14/05/2009 11.38 Pagina 15
Dear Sir or Madam,
thank you for choosing our Iris Plus stove.
Before using your stove, please read this booklet carefully: it explains how to get the most from all its features in com-
plete safety.
Please remember that the 1st ignition must be carried out by the Dealer, which verifies the installation and completes
the guarantee.
The manufacturer cannot be held liable for any damage which may derive from using the stove after incorrect installa-
tion, incorrect maintenance or misuse.

SAFETY INFORMATION

The stove is designed to heat the room it is installed in by radiation and by air movement from the front grilles. The
heat is generated by automatic pellet combustion in the firebox.
The only risks which may derive from use of the stove are linked with non-compliance with the installation instruc-
tions, direct contact with live electrical parts (inside) or with the fire or hot parts (glass, pipes and hot air outlet), and
the introduction of foreign substances. Only use pellets as fuel.
If components fail, the stove is fitted with safety devices which turn it off. This must be allowed to happen without
interference.
For correct operation, the stove must be installed in compliance with the instructions on page 6 and the door must not
be opened while running: combustion is managed automatically so no manual operations are needed.
Never put foreign substances in the firebox or hopper.
Do not use flammable products to clean the smoke duct.
Firebox and hopper components must only be cleaned using a vacuum cleaner.
The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth.
Do not clean when hot.
Make sure the stove is installed and ignited by the Dealer, which must also complete the guarantee and take responsi-
bility for correct installation.
During stove operation, the outlet pipes and door reach high temperatures.
Do not keep objects which are not able to withstand heat in the immediate vicinity of the stove.
NEVER use liquid fuels to light the stove or rekindle the embers.
Do not block ventilation openings in the room where the stove is installed or air inlets in the stove itself.
Do not get the stove wet, and do not put wet hands near electrical parts.
Do not fit reducers on the smoke outlet pipes.
The stove must be installed in a suitable place as regards fire safety, and provided with all the facilities (power supply
and outlets) it requires for correct safe operation.
Before carrying out any maintenance, disconnect the device from the mains power supply.

DECLARATION OF CONFORMITY

The undersigned EDILKAMIN S.p.A. with registered office in C.so Porta Romana 116/a – 20122 Milan - Fiscal codes P.IVA 00192220192
Declares under its own responsibility as follows:
The wood pellet stoves specifi ed below is manufactured in accordance with the 89/106/CEE Directive (Construction Products)
WOOD PELLET STOVES, trademark EDILKAMIN, called IRIS PLUS
MODEL: IRIS PLUS SERIAL NO: Ref. data tag plate
YEAR OF PRODUCTION: Ref. data tag plate
Compliance with the 89/106/CEE Directive is also determined by compliance with the European standard:
EN 14785:2006 as shown in test report 400404 issued by:
KIWA GASTEC ITALIA S.P.A. Notifi ed Body NB 0694
and by documentation submitted to KIWA GASTEC ITALIA S.p.a.
The undersigned also declares as follows:
the IRIS PLUS pellets stoves complies with the requirements of the following European directives:
2006/95/CEE – Low voltage directive
89/336/CEE – Electromagnetic compatibility directive
EDILKAMIN S.p.a. declines all responsibility for malfunction of the equipment in the event of substitution, assembly and/or altera-
tions of any sort carried out by personnel not working for or authorised by EDILKAMIN S.p.a.
14