Instructions For Use; Operation - NUK Expressive 62772 Instrucciones De Operación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TUBING & PUMP UNIT
1. Screw the connector cap (11)
onto the connector (12).
2. Place the end of the tubing (9) on the
tubing connector (10) and attach to
the port of the connector (12).
3. Insert the assembled connector
(12) with attached tubing into
the side of the pump unit (13).
You are now ready to begin
using your NUK
Double Electric Breast Pump
Before using the pump, disassemble and clean according to the instructions in
sections 5 and 6.

8.1 Operation

1. Plug in the voltage adapter (14). Turn the
pump on by pressing the power button
(19) on the front of the pump unit.
03_62772_5112_A_DEBP_Booklet_REL_2-19-13_Added pages divisible by 4.indd 10
Expressive
®
Breast shield (2)

8. Instructions for Use

9
10
Cap
11
Connector
9
10
Connector
NOTE: If breast milk gets into the
tubing, stop the pump at once.
Clean the tubing according to
the instructions in Section 6.1
before continuing to pump.
NOTE: If you are going to express from
only one breast, remove one end of the
tubing (9) from the tubing connector (10)
and use the cap on the tubing connector
(10) to plug the connector to ensure a
vacuum for expression.
10
12
3
4
13
3/18/2013 2:26:55 PM

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido