Technical Specifications - 3M 2000 Serie Manual Del Usuario

To reduce the risks associated with lifting and handling:
• Always follow proper lifting and handling practices when moving system components.
To reduce the risks associated with tripping, falling and tipping:
• Route air hoses and any extension cords away from traffic areas, sharp edges, moving parts and hot surfaces.
Do not pull on air hoses to move the turbine unit.
To reduce the risks associated with sharp point:
• Do not touch the end of the air hose connection coil relief spring.
To reduce the risks associated with hot surfaces:
• Do not touch the hot turbine air outlet nozzle.
To reduce the risks associated with environmental contamination:
• Spray materials, solvents, other cleaning materials and electronic components must be disposed of per federal,
state and local regulations.

Technical Specifications

Model
Voltage
Current
Frequency
Pressure
Noise Level
* Area noise levels measured with B&K 4443 noise dosimeter to measure potential exposure. These measurements were taken at least 12 feet
from the turbine. To reduce the noise exposure make sure to have the turbine at least 12 feet away from the spray area.
It is recommended to wear ear protection if using the turbines for an extended period of time.
2030-T
120 VAC
12.5 AMP
60 HZ
5 psi
80 dBA
CAUTION
2040-T
120 VAC
12 AMP
60 HZ
7 psi
80 dBA
4
2045-T
120 VAC
13 AMP
60 HZ
8 psi
80 dBA