Fein GRIT GI 100 Instrucciones De Uso página 12

GI100.book Seite 12 Freitag, 4. August 2006 10:30 10
EN
The workpiece must always lie securely on the
grinding rest and the stop. Workpieces that are
too small or too thin may not be worked. Danger
of injury from workpieces being thrown from
the machine.
Never touch the running grinding belt. Dan-
ger of injury.
Press the emergency-off switch immediately in
danger situations. The machine runs on for up to
50 seconds.
Clean the ventilation slots of the machine regu-
larly. The motor fan draws dust into the housing.
Excessive accumulation of metal dust can cause
electrical dangers.
Ensure that the machine is positioned securely
and horizontal. Serious injuries can be caused if
the machine tips over during operation.
The mains plug of the machine may be mounted
only by a qualified electrician. The protective
conductor in the mains socket outlet must be
connected with the protective earthing of the
mains supply.
Pull out the mains plug for maintenance and
repair! Switching the machine on unintentionally
can lead to serious injuries.
Have the electrical safety of the machine checked
regularly in accordance with statutory regula-
tions. For machines that have not been checked,
there may be danger of electrical shock!
Check the rotation direction of the motor before
starting the operation of the machine for the first
time. If the rotation direction of the motor is
incorrect, the workpiece can be thrown from
the machine and cause an accident. The rotation
direction may be changed only by a qualified
electrician.
Make sure that you or other persons are not
standing directly next to the grinding belt when
switching the machine on. The grinding belt can
tear apart and cause serious injuries.
12
At a glance.
1 Star-knob bolt for adjusting the tracking of the
grinding belt
2 Protective cover, top
3 Adjustment screw for face- grinding rest
4 Star-knob bolt for protective cover, top
5 Stop
6 Spark guard wing bolts
7 Spark guard
8 Grinding rest
9 Star-knob bolt for grinding rest
10 Star-knob bolt for protective cover, front
11 Belt tension lever
12 Emergency OFF pushbutton
13 Ventilation slots
14 On/Off switch
15 Contact wheel
16 Face- grinding rest
17 Drive wheel
18 Side cover
19 Screw for side cover
20 Connection sleeve for dust extraction
21 Instruction label
Intended use of the machine.
The machine is intended for stationary grinding
of metal materials using manufacturer approved
grinding belts.
Mounting instructions.
Fasten the machine onto the GRIT GIXS or
GIXBE undercarriage (see mounting instruc-
tions). The fastening of both the undercarriage
to the floor and the machine to the undercar-
riage must be suitable to withstand the forces
occurring during working.
Use appropriate screw connections (size,
length) for mounting.
GI 100