Security Settings - D.A.S. DSP-26 Manual De Usuario

OPERATION
6. Security Lock Outs

6.1 Security Settings

There are three levels of security for the unit, Lock Out, OEM Lock and Owner Lock. These are used
to protect the parameters or Programs from being inadvertently changed or tampered with by unqualified
or unauthorized users.
6.2 Lock Out
This is the most basic security. With lock out on, no parameters can be adjusted (except Lock Out and
display Contrast), mutes and trims are inactive and no Programs can be stored or recalled. Unless you
know how to unlock the unit in the Utilities page, the unit will remain safe from accidental change.
6.3 OEM Lock
OEM Lock allows the user to lock any or all of the parameters in a single Program from being seen
adjusted. These locks are stored with the Program.
or
Pressing from the Utilities screen shown below displays the password screen. The default password
is "OEM". Enter a new alphabetic password by using the and buttons to move the cursor and the
down buttons or rotary encoder to change the letters.
Save/Enter
Pressing
6.4 Lock All
This screen allows all the parameters to be locked immediately, they can then be selective ly unlocked
at a later date. To Lock All parameters, use or turn the rotary encoder clockwise to display "Yes" .
If some locks have already been set and you want to unlock them all, set this option to "Yes" then back
to "NO".
To skip this option, press
30
SETUP
LOCK OUT
SETUP
OEM LOCK
OEM PASSWORD
briefly displays the following message and then enters the Lock All mode.
LOCK SETUP
ENTER WHEN DONE
SAVE/ENTER
.
LOCK SETUP
LOCK ALL ?
Manual del usuario/ User´s manual
OFF
OFF
* * * * * * * *
OEM
OEM
NO
DSP-26