Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
1.Programs
1.1 Program Saving
A Program can be stored in any one of the 60 available memory locations. Pressing
displays the Save screen with the last used Program on the screen. Pressing either
turning the rotary encoder enables the selection of the required memory for saving your new Program.
1.2 Program Naming
The Program can be given a name using alphanumeric characters up to 8 digits in length. To input a
new name, press the to move the cursor into the name area of the screen. The screen will display
the current name of the Program that is being edited ( after a short period of time), and the cursor will
locate under the first character to be modified. Characters can be changed using either the
NEXT
buttons or the rotary encoder and the next character along can be selected using the button.
Use the
button to go back to change or correct previously set characters.
SAVE/ENTER
Pressing
1.3 Program Lock
User Programs can be locked to prevent overwriting of memories too easily. A store will fail if the
lock button character is displayed when
will stay on the screen for a few seconds. After this Message has disappeared the lock can be turned
NEXT
off with either the
successful.
After the saving operation the DSP-26 asks whether the Program should be saved 'Locked' or 'Unlocked'.
Turning the rotary encoder will select between 'Locked' and 'Unlocked' , select your preference and
SAVE/ENTER
press
1.4 Program Recall
RECALL
Pressing
will enter the recall mode with the last used Program on the screen. Use the
NEXT
buttons or the rotary encoder to select a Program to recall. Only Programs that have already
been stored will be available to choose from. There will always be at least one default Program in
existence in the unit's memory.
24
SAVE
a second time will perform the saving if the Program location is not locked.
SAVE/ENTER
button by turning the rotary encoder anticlockwise. The saving will now be
PROGRAM LOCKED!
a third time to complete the operation.
STORE UNLOCKED ?
STORE UNLOCKED ?
Manual del usuario/ User´s manual
1 MINISTRY
is pressed. The 'Program Locked!' message
1 PLASA
LOCKED
UNLOCKED
SAVE/ENTER
PREV/NEXT
or
PREV/
PREV/
DSP-26
Tabla de contenido
