Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RECALL
Used to save edited Programs to a new memory location and to recall saved setups
from the internal memories.
To select a reconfigured Program press the
new the manual does not contain any preset Programs but, if the unit has been used
before it may contain user preprogrammed setups. Use the
located on the left side of the LCD screen to choose the correct Program. Press
RECALL
The save key is also used as an
Pressing the
RECALL
Mute
Press any of the front panel
button will light red when the output is muted.
LCD Display
This display can generally be addressed in four working areas:
1. The top left shows the mode that the DSP-26 is in ( Input or Output)
2.The button left displays the currency the currently selected parameter associated with the above
mode.
3.The button right area indicates the value associated with this parameter.
4.The top right only displays information relating to the current state of the DSP-26.
Mode
Parameter
DSP-26
SAVE/ENTER
and
again to enable the Program.
SAVE
key when in recall mode will exit the operation and pressing
in a save operation will achieve the same result.
Mute
DIGITAL SPEAKER
MANAGEMENT
IN SUM A+B
Delay
2.14ms
Manual del usuario/ User´s manual
RECALL
ENTER
button to confirm certain operations.
keys to toggle the channel in and out of mute. The
*
Information
Value
FRONT PANEL
button on the front panel. From
PREV/NEXT
buttons
23
Tabla de contenido
