Stereo Link - D.A.S. DSP-26 Manual De Usuario

2.4 LCR 2 way mode
When using a derived center cluster feed such as in LCR (Left, Center, Right) installation, the
configuration can be changed to a 3 channel 2 way configuration, where the center channel is a sum
of A and B.
Outputs 1 and 4 are routed from Input A.
Outputs 3 and 6 are routed from Input B.
Outputs 2 and 5 will be routed from Input sum A+B.
All delay linking defaults to off.
Stereo Link will be switched on.
Band Names will be set to 'Low' and' High'.
Output 4
L
Delay
Link
H
Output 1

3. Stereo Link

3.1 Stereo Link
This parameter adjusts the stereo linking of various Input and Outputs Parameters and works in
conjunction with the Configuration setting. This parameter is also stored as part of the Program data.
In 2 channel 3 way mode, Output pairs 1 and 2, 3 and 4, 5 and 6 are linked.
In LCR 2 way mode Outputs 1, 2 and 3 are typically low and 4, 5 and 6 are high.
3.2 Step and Offset
There are two different relationships between linked parameters: Step and Offset.
parameter has discrete selections such as filter type, high pass slope, polarity, etc. When
A step
DSP-26
Stereo Link
Output 5
L
Delay
Link
H
Output 2
Stereo Link
SETUP
STEREO LINK
Manual del usuario/ User´s manual
OPERATION
Delay
Link
ON
Output 6
L
H
Output 3
27