D.A.S. DSP-26 Manual De Usuario página 38

OPERATION
MASTER
Enables transmission of all control changes to other devices on the same MIDI channel for example
to run two DSP-26 in parallel for stereo applications.
THRU
Allows the throughput of data received at the MIDI in socket to the MIDI out .
PCPORT
This mode allows the RS-232 port on the rear of the DSP-26 to be used to perform MIDI systems
exclusive dumps and to control other DSP-26.
9.3 MIDI Systems Exclusive Dump
This Utility is used to transfer Program information between DSP-26 units of the same model as well
as to any MIDI Sysex ( systems exclusive)capable sequencer or computer. Attach a MIDI cable from
the MIDI out of the sending unit to the MIDI in of the receiving unit.
Pressing the button on the sending unit will display the prompt screen below.
A MIDI sysex message is now sent out that prompts the receiving unit that an incoming MIDI dump
will occur. A receiving DSP-26 unit should display a message asking to allow an incoming dump.
If you do not want the receiving unit to have its memories overwritten then press the button on the
receiving unit to change the "Allow Dump ?" message to "No". The receiving unit will return to normal
operation and ignore any incoming Program information.
PREV/NEXT
Pressing
SAVE/ENTER
Pressing
34
SETUP
MIDI MODE
SETUP
MIDI MODE
SETUP
MIDI MODE
SETUP
MIDI DUMP
MIDI DUMP ?
ENTER TO CONFIRM
at any time will return the sending unit to the Utilities mode.
on the sending unit performs the dump.
Manual del usuario/ User´s manual
MASTER
THRU
PCPORT
*
NO
DSP-26