ABB PSE18 Manual De Usuario página 13

Table 6.1: Parameter list
Description
Rated Current of motor
Start Ramp time
Stop Ramp time
Initial/End Voltage
Current Limit
Torque Control during start
ramp
Torque Control during stop
ramp
Kick Start
Electronic Motor Overload
Protection (EOL)
Tripping class
Type of operation
Underload Protection
Level
Type of Operation
Locked Rotor Protection
Level
Type of Operation
FieldBus Control
Fieldbus Address
Download Parameter
Operation When Fault
Type of Operation
HAnd = Manual reset of the protection or fault.
1
Auto = Automatic reset of the protection or fault.
2 OFF = Fieldbus is not allowed to control the motor.
On = Fieldbus is allowed to control the motor.
3
255 = Address of the FieldBusPlug will be used.
dPon = Download of parameters from PLC enabled.
4
dPoF = Download of parameters from PLC blocked.
Display
OFF, 10A, 10, 20, 30
Softstarters Type PSE18...PSE370 User Manual short form 1SFC132059M9901 13
Setting range
Individual Individual
1...30 s
OFF, 1...30 s
30...70 %
1.5...7 x I e
OFF, On
OFF, On
OFF, 30...100 %
HAnd, Auto
1
OFF, 0.2...1 x I e
HAnd, Auto
1
OFF, 0.5...7 x I e
HAnd, Auto
1
OFF, On
2
0...255
4
dPon, dPoF
trIP, LocC
5
HAnd, Auto
6
Accessible only if On is previously selected.
5
trIP = Trip on fault.
LocC = Local control on fault - hardwire control is pos-
sible
Accessible only if trIP is previously selected.
6
HAnd = Manual reset of the protection or fault.
Auto = Automatic reset of the protection or fault.
Default Actual
value setting
10 s
OFF
40 %
7.0 x I e
OFF
On
OFF
10
HAnd
OFF
HAnd
OFF
HAnd
OFF
3
255
dPon
LocC
HAnd