Evolution EVOMAG 28 Instrucciones Originales página 29

www.evolutionpowertools.com
of travel. The cutting head must not move
downward under its own weight, but must
have to be raised or lowered by the operator
using the feed handles.
MACHINE
EVOMAG28
EVOMAG50
EVOMAG75
lock nuts are located along the Right Hand
edge of the machine's main slide.
locknuts which lock the adjustment screws in
place.
adjusting screw, work upwards turning the
adjustment screws slightly so that to any free
sideways movement of the slide is eliminated.
cutting head up and down. There should be no
free play, but no binding anywhere throughout
the range of travel.
several times to ensure that any free play or
movement has been eliminated.
machines cutting head and slide should move
up or down freely without any binding and
without any side to side movement
completed, retighten the locknuts.
and cutting head.
No. Of adjustment
screws
7
5
5
29
EN
ES
FR