Troubleshooting; Safety Notices; Fault Indications - Caso MI 30 Ceramic Manual Del Usuario

 After cleaning the interior space, leave the oven door open until the interior of the device
is completely dry.
Front of device and operating panel

 Clean the front of the device and the operating panel with a soft, slightly damp cloth.
 Please bear in mind that the operating panel does not get wet. Use a soft, damp cloth
for cleaning.
► Leave the oven door open to prevent the device from being re-started accidentally.
Exterior housing

 Clean the exterior surfaces of the device with a damp cloth.
Ceramic base plate

 Wipe the bottom of the oven with a mild cleaning agent. If the floor of the oven is
excessively dirty, you can use a mild cleaning agent.

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Safety notices

► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.

17.2 Fault indications

In the event of a fault, an error code will appear in the display; it describes the cause of the
fault.
Error code Description
E-01
The display shows E1 and you can here a signal tone. Press
► If error messages continue to appear after an extended waiting period and restarting the
device, then the device will need to be sent to Customer Service to be inspected.
Please note
Attention
Please note
.
65