Peavey SRC Serie Manual De Instrucciones página 8

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

40
39
41
43
44
46
47
45. Talkback Level
Adjusts the level of the talkback mic. This affects the feed to the L-R and AUX 1-4.
46. PFL Master Level
Sets the level of the PFL mix that is sent to the headphone/control room level control. Functions
only when PFL is active. (See #47.)
47. PFL Active
This LED illuminates when the PFL is active and its signal is overriding the standard L-R mix in
the headphone and control room outputs and at the L-R meters. The signals that are present in
the PFL mix can be seen by the individual LEDs lit.
48. Headphone/Control Room Level
Adjusts the volume of the headphone and control room outputs. The output changes from the
L-R mix (post fader) to the PFL mix whenever the PFL is active.
42
45
48
39. Tape Out Level
Sets the level of the main left and right stereo signal
sent to the tape output jack. It is post master fader.
40. Tape Input/Output
One half of this stereo RCA phono jack provides a
signal for the recording inputs of a stereo tape deck,
with an amplitude set by the Tape Output Level
control (#39). The other half accepts a stereo input
(nominally -10 dBu) from the output of a tape deck or
CD player.
Caution:
The tape output signal includes the tape input
signal, which can cause feedback if the Tape Input
Level (#41) is turned up while recording on a single
machine that is connected to both the tape output
and tape input jacks.
41. Tape Input Level
Adjusts the level of the tape signal (#40) supplied to
the L-R mix and to the AUX 1 & 2 buses.
42. Tape Assign
Adds a mono sum of the tape signal to the AUX 1 &
2 mixes. This can be used to send the tape signal to
monitors for soundtrack monitoring. The tape signal
is always assigned to the L-R mix, regardless of this
switch's position.
43. Talkback Assign
Selects which outputs will have the talkback mic
signal (L-R or AUX 1-4) for house or monitor feeds.
44. Talkback Enable
Press and hold to engage the talkback mic. The out-
put is directed according to the assignment selection.
(See #43.)
Page 8
Tabla de contenido
loading

Este manual también es adecuado para:

Src 4018 fcSrc 4026 fcSrc 4034 fc

Tabla de contenido