Control Unit Description - Vimar SL230.T Manual De Instrucciones Para La Conexión Y El Uso

SL230.T - SL230.T.120

5. Control unit description.

Control unit for governing gear motors for sliding gates at 230/120 VAC equipped with inputs for built-in receiver limit switch.
The control unit is:
- designed to customise the space and speed of deceleration in both opening and closing phases.
- equipped with an obstacle detection system (if there is an encoder circuit)
- designed for input diagnostics via LED
- fitted with an integrated receiver with capacity for 250 remote control codes (hard coded or rolling code)
Key:
1. Removable terminal for 24 VDC outputs, for safety devices and control inputs
2. Removable terminal for the power supply line, flashing lamp and 230 VAC electric motor
3. Fixed antenna terminal
4. LED for input diagnostics
5. LED for programming diagnostics
6. Push buttons for programming the travel and remote controls
7. Trimmer for adjustments
8. Dip switch for programming functions
9. Protection fuse for the motor output, transformer and flashing lamp (230V F5A quick-acting, 120V F6.3 A quick-acting)
10. Encoder Connector (only for motor models with Encoder)
CAUTION:
Secure the cables on the actuator with cable ties, to avoid them becoming loose and creating hazardous situations.
In addition, secure the cables of the M2 power terminal block with cable ties separately from the cables of the M1 signal terminal block.
16
10
CN1
7
DL1
P.IN
DL2
SEQ
DL3
STOP
DL4
PED
DL5
SCL
DL6
SOP
DL7
LSC
DL8
LSO
COM
+AS
-AS
+
P.OUT
+WL
M1
1
4
2
M2
14 15 16 17 18 19 20
FL FL
MOP MCL
TR1 TR2 TR3
PROG
DL.S
TR4 DSW1
ON
1 2 3 4 5 6 7 8
TR5
DSW2
ON
P1 P2
1 2
F2=F5A
21
ELVOX SL230.T
N L
EN
23 22
3
5
8
6
9