Technical Data; Preparing The Wiring; Electrical Connections - Vimar SL230.T Manual De Instrucciones Para La Conexión Y El Uso

SL230.T - SL230.T.120

2. Technical data.

Control panel
Power supply
Type of use
Frequency of use
Operating temperature
Accessories power supply
Flashing light output
Gate open warning light output
Protection fuse for 230VAC line
Protection fuse for 120VAC line

3. Preparing the wiring.

4. Electrical connections.

Draw out the power supply cable for a length of approx. 20 cm. Strip the earth wire conductor.
Crimp the free eyelet screwed to the earth connection socket on the gear motor casting (Ref. A in the figure); for easier crimping you can also remove
the eyelet from the socket making sure you reconnect the pre-wired earth between the control unit and the gear motor correctly.
Strip the live and neutral wires and connect them to the control unit as indicated in the manual.
(230/120 VAC)
Key:
A - Sliding actuator
B - Rack
C - External photocell
D - Internal photocell
E - Photocell column
F - Flashing lamp
G - Keyswitch
EN
SL230.T / SL230.T.120
230 VAC 50 Hz - 120 VAC 50/60 Hz
Residential and apartment blocks
30%
-10°C / +55°C
24 V DC - 300 mA max
230/120 VAC - 25 W max
24 VDC 2W max
Quick-acting fuse F5 A
Quick-acting fuse F6.3 A
15