KENMORE ELITE 363.6369 Serie Guía Para El Uso Y Cuidado página 14

USING SPEEDCOOK FEATURES
CAUTION: When using speedcook programs,
remember that the oven, door and dishes will
be very hott
Prior to the first use of your oven, the clock must be set.
See the Quick Start section.
Before you begin, make sure the turntable support is
in place.
Use the black metal tray at all times when speedcooking.
The turntable support must always
be in place when using the oven.
Put food or non-metal, oven-safe
ceekware directly on the black
metal tray to speedcook.
SP£EDCOOK
0
Q
START/INTER
TO USE A PRE-SET
SPEEDCOOK MENU
This oven is already pre-set to cook
over 100 popular dishes.
1. Press the speedcook button.
If no selection is made within
15 seconds, the display will revert
back to the time of day.
2. Turn the selector dial to FOOD MENU.
Press the dial to enter.
3. Turn the selector dial to select the type
of food category you want. Press the
dial to enter.
4. Turn the selector dial to select the
specific food (menu selection). Press
the dial to enter.
,
Turn the selector dial to select amount,
size and/or doneness (if required, the
oven will prompt you.) Press the dial
after each selection.
6. Once the display shows START? either
press start or the selector dial to start
cooking.
For certain foods, turn the food over when
the oven signals TURN FOOD OVER.
Press START to resume cooking.
For certain foods, the oven will signal
CHECK for DONENESS. Check to see
if the food is done to your liking. The
oven will continue to cook for several
minutes. Take the food out when it is
done to your liking.
To review settings during cooking, press
the selector dial.
If you enter an undesired selection at any
time, simply press the BACK button to
return to the previous step, or press the
STOP/CLEAR button and re-enter the
desired selection.
Early in a speedcook program, you will
see OPTIMIZING COOK TIME in the
display. The oven automatically senses
the electrical voltage level in your home
and adjusts the cooking time up or down
for proper cooking.
If the door is opened during cooking,
the oven will stop and PAUSE will
appear in the display. Close the door
and press the START/ENTER button
to resume cooking.
At anytime during cooking you can turn
the selector dial to change the cooking
time. You can change power levels by
pressing POWER, then turning the
selector dial and pressing to enter.
To assure consistent cooking results,
the oven may reduce power levels if
the oven is hot at the beginning of
a program.
At the end of cooking, the automatic fan
may continue to run for a short time to
cool internal components.
To cook for additional time after a
cooking cycle has been completed,
use the Resume feature.
14