Set The Clock; Quick Start - KENMORE ELITE 363.6369 Serie Guía Para El Uso Y Cuidado

Homo de speedcook advantum 120 technology
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

OPTIONS
0
0
SET THE CLOCK
When you first plug in the oven or
after a power outage:
1. Turn the selector dial to set the hour.
Press the dial to enter.
2. Turn the dial to set the minute.
Press the dial to enter.
3. Turn the dial to select AM or PM.
Press the dial to enter.
To change the time:
1. Press the OPTIONS button.
2. Turn the dial to CLOCK. Press the
dial to enter and follow the display
directions to set.
SPEEOCOOK
0
0
START/ENTER
BEGIN
SPEEDCOOKING
Step 1:
Press the SPEEDCOOK button.
Step 2:
Turn the dial until the display shows FOOD
MENU. Press the dial to enter.
Step 3:
Turn the dial to select the type of food you
want. Press the dial to enter it.
Step 4:
Turn the dial to select the specific food.
Press the dial to enter it.
Step 5:
Turn the dial to select the amount, size
and/or doneness (if required, the oven will
prompt you). Press the dial after each
selection.
Step 6:
After the last selection is made, the time
and power levels will be displayed. This is
followed a short time later by a cookware
message and START?.
Step 7:
Once the display shows START?, place the
food in the oven and press the dial or start
button to start cooking. Speedcooking does
not require preheating.
= Press STOP/CLEAR
at any time to
stop cooking.
The turntable
support
must always be in place
when using the oven.
Put food or non-metal,
oven-safe cookware
directly on the black
metal tray to
speedcook.
ADD MINU1E
0
0
MICROWAVING
WITH THE
ADD MINUTE
FEATURE
Press ADD MINUTE for one minute
increments of microwave cooking time.
The oven starts immediately. You may
add or subtract time by turning the dial.
You may also add time in one minute
increments by pressing ADD MINUTE.
The turntable
support
must
always be in place when
using the oven.
The glass microwave
turntable
should
always be in place
when microwaving.
11

Capítulos

Tabla de contenido
loading

Tabla de contenido