Operation; Connecting The Compressed Air Source - Parkside PDSP 1000 A1 Instrucciones De Utilización Y De Seguridad

Safety advice / Operation
D ANGER OF INJURY! Disconnect the device from the com-
pressed air source before filling it with blast medium.
N OTE! Please observe the safety advice provided by the manu-
facturer of the blast medium.
U se only materials for the blast medium that are suit-
able for the sandblasting gun. Do not use quartz sand.
There is the danger of toxic silicon dust forming.
T ake precautions to ensure that other people are not
contaminated (dust generation).
E nsure that the spent blast medium is trapped and
collected so that it can be disposed of in an environ-
mentally compatible manner.
Do not remove rating plates or labels–they are safety-relevant
parts of the device.
If you are inexperienced in the use of this type of device, you should
seek out information or training to learn how to handle it safely.

Operation

Q

connecting the compressed air source

Q
NOTE: Operate the sandblasting gun
sate- and oil-free compressed air and never exceed the maximum
working air pressure at the device of 8 bar.
NOTE: The compressed air source must be fitted with a (filter) / pres-
sure reducer so that the air pressure can be regulated.
C onnect the sandblasting gun to a suitable compressed air source
by connecting the quick-release coupling of the air supply hose with
the plug-in nipple
place automatically.
34 GB
to the sandblasting gun
3
only with cleaned, conden-
1
. It locks itself in
1