Other Convenient Rds Functions And Adjustments - JVC KD-S9R Manual De Instrucciones

2
Select "PTY SRCH" (search) if not
shown on the display.
3
Select one of twenty-nine PTY codes.
(See page 11.)
4
Press and hold the number button
for more than 2 seconds to store the
PTY code selected into the preset
number you want.
PTY preset number appears, and selected
code name and "MEMORY" alternate on the
display.
5
Finish the setting.
To search your favorite programme type
1
Press and hold PTY (programme type)
for more than 1 second while listening
to an FM station.
PTY
The last selected PTY code and preset number
appear.
12
Selected code name appears
on the display.
• If the code already stored
in memory is selected, it
will flash on the display.
2
Select one of PTY codes stored in
preset number buttons (1 to 6).
PTY search for your favorite programme starts
after 5 seconds.
Ex. When "ROCK M" is stored in preset number
button 2
• If there is a station broadcasting a programme of
the same PTY code you selected, that station is
tuned in.
• If there is no station broadcasting a programme
of the same PTY code you selected, the station
will not change.
Note:
In some areas, the PTY search will not work correctly.
Other convenient RDS functions
and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS station,
something different will happen. If the signals from
that preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
another frequency broadcasting the same
programme as the original preset station is
broadcasting. (Programme search)