Descaling The Appliance; After Cleaning And Descaling; Cleaning The Air Filter - Beurer LB 50 Instrucciones Para El Uso

If there is any water left in the appliance, pour it out.
Use a new pad [4].
Wash out the new pad [4] with clean water and put in the hotwater chamber.

Descaling the appliance

Descale the humidifier
1
Never try to remove any limescale deposit with pointed or sharp
objects. This might damage the humidifier or cause it to leak.
You should also note the manufacturer's advice for the descaling agent
which you are using.
Use a standard commercial descaling agent.
Fill the hotwater chamber up to the brim with descaling solution.
Leave the descaling solution to work until the limescale has dissolved.
Pour away the descaling solution. Tip the appliance sideways to remove the
2
descaling solution.
Rinse out the appliance thoroughly with clean water.

After cleaning and descaling

1 Insert the pad
Put the cleaned pad or replacement pad [4] into the hotwater chamber.
Assemble the appliance
2
Put the steam tower [3] back into the humidifier. Press the steam nozzle [2] into
the opening at the top of the steam tower [3].
Screw the tank catch [9] onto the water tank [8]. Place the water tank [8] in the
humidifier.
Place the cover [1] on top of the humidifier.

Cleaning the air filter

We recommend cleaning the air filter every week.
Turn the humidifier so that the air filter flap [11] at the back of the appliance is
1
facing you. Undo the catch on the flap and remove the air filter flap [11].
Remove the black air filter [12] and rinse it thoroughly with clean water.
Once the filter is dry you can reassemble the air filter. Insert the black air filter [12]
2
inside the air filter flap [11].
Insert the two small hooks of the air filter flap [11] into the right of the air filter
opening. Press the filter flap firmly until it clicks into place.
18