Bushnell Speedster Manual De Instrucciones página 7

3. ENTER
a. Selects field for editing (Current line position AND field will be shown in reverse
image text)
4. PAGE
a. Will accept and save all edit choices displayed (as long as lime position AND field are not
both in reverse image text)
b. Will scroll to the next screen
5. TRIGGER (Activate Radar)
a. Has no effect while in PLAYER EDIT screen
6. POWER (On/Off )
a. Will cancel all current activity of radar
b. Current player edits will NOT be saved for future operation (unless the PAGE button is
pressed before powering off )
c. Unit will be powered down per description in General Switch Operation
WHAT TECHNOLOGY DOES THE SPEEDSTER USE?
The Speedster contains a K-Band microwave RF transmitter whose signal gets reflected by the
target object. The reflected signal will have a "Doppler Shift:" proportional to the target speed.
This Doppler frequency shift is detected in the receiver, amplified, filtered, and then digitized in
an Analog to Digital Converter (ADC), and passed on to the Digital Signal Processing (DSP)
chip. Using complex fast fourier transform software algorithms, the DSP chip filters out false and
low-level return signals, to identify and display the speed of the desired target. The speed, along
with various statistics and averages are then displayed on the LCD display.
SPECIFICATIONS
Speed Performance:
Accuracy:
Battery Type:
Operating Time:
Operating Temperature Range:
Length:
Width:
Height:
Weight:
11
Balls: 6-110 MPH / 10-176 KPH from 75+ Feet
Cars: 6-200 MPH / 10-320 KPH from 1350 Feet
+/- One MPH (see Cosine Effect section)
AA (6)
Up to 20 hours
32-104 F / 0-40 C
4.3 Inches / 109 mm
3.4 Inches / 86 mm
7.2 Inches / 183 mm
13 Ounces / 369 Grams
INFORMATION TO THE USER
Changes or modifications to the Bushnell Speedster Speed Gun, instruction manual or printed
materials, not expressly approved by Bushnell for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY / REPAIR
TWO-YEAR LIMITED WARRANTY
Your Bushnell ® product is warranted to be free of defects in materials and workmanship for two years after
the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the
product, provided that you return the product postage prepaid. This warranty does not cover damages caused
by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell
Authorized Service Department.
Any return made under this warranty must be accompanied by the items listed below:
1) A check/money order in the amount of $10.00 to cover the cost of postage and handling
2) Name and address for product return
3) An explanation of the defect
4) Proof of Date Purchased
5) Product should be well packed in a sturdy outside shipping carton, prevent damage in transit,
with return postage prepaid to the address listed below:
IN U.S.A. SEND TO:
Bushnell Performance Optics
Attn.: Repairs
8500 Marshall Drive
Lenexa, Kansas 66214
For products purchased outside the United States or Canada please contact your local dealer for applicable
warranty information. In Europe you may also contact Bushnell at: 33 141 44 94 80
* This warranty gives you specific legal rights. You may have other rights which vary from country to country.
©2002 Bushnell Corporation
IN CANADA SEND TO:
Bushnell Performance Optics
Attn.: Repairs
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9
Bushnell Performance Optics Service Centre
Columbusstraat 25
3165 AC Rotterdam
The Netherlands
12