Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Congratulations on the purchase of your Bushnell
precision instrument designed to provide many years of enjoyment. This booklet will
help you achieve optimum performance by explaining its adjustments and features as
well as how to care for this precise speed and statistic measuring instrument. To
ensure optimal performance and longevity, please read these instructions before using
your Bushnell Speedster.
INTRODUCTION
Your Bushnell Speedster uses digital technology and DSP (Digital Signal Processing) to
provide instantaneous and accurate Real-Time speed measurements to +/- One-Mile Per
Hour (MPH) accuracy. For example, with the TRIGGER engaged, you can see the Real-
Time speed measurement of a moving object as it accelerates or de-accelerates. The
Bushnell Speedster is a handy, multi-functional speed gun for all kinds of sports
enthusiasts. Track everything from pitching speeds to cars at the racetrack. The Bushnell
Speedster measures the speed of a baseball at 6-110 MPH from 75 + feet away from the
ball, and the speed of a racecar from 6-200 MPH at 1,350 feet away. Unlike any other
speed gun available, the Speedster allows you to keep statistics for baseball and softball, and
provides last and average speeds for any type of object measured.
1
®
Speedster
™
. The Speedster is a
BATTERY INSTALLATION
Your Bushnell Speedster operates on six AA alkaline batteries. To install, remove the battery cover (A)
by depressing both sides of the handle bottom (B). Remove the battery cartridge (C) and install the
batteries so that the positive (+) and negative (-) terminals of the batteries match the markings inside
the battery cartridge. Insert the battery cartridge so that the symbols (
cartridge line up and match the symbols (
cover (A) back onto the handle so that the textured side of the battery cover matches the textured
surface of the handle grip area.
B
C
A
After insertion of batteries into the battery cartridge, you need to make sure that all batteries within the battery
cartridge are making contact with each other (A), and that each end of the battery is touching the cartridge contacts (B).
B.
B.
USER INPUT SWITCHES
Your Bushnell Speedster operates on six AA batteries. Make sure they have been installed according
to the instructions listed in the battery installation section.
There are six switches on the Speedster, five of which are on the
back display panel and one is a "TRIGGER" position switch. The
switches are labeled as:
1. POWER (On/Off )
2. TRIGGER (Activates radar)
3. ENTER
4.
( )
(Up Arrow)
( )
5.
(Down Arrow)
6. PAGE
jh
) located on the battery
jh
) located on the handle housing (D). Place the battery
D
ATTENTION!:
B.
A.
A.
B.
(Figure 1)
2
Tabla de contenido
