Vacuum Packing Of Bottles - Unold 48040 Instrucciones De Uso

light goes out and the appliance
stops automatically.
7. Remove the hose from the appli-
ance and from the container.
Opening the vacuum packed container
To open the container, press the button in the middle of the lid downward. The
vacuum is dissipated and the lid can be taken off of the container.

VACUUM PACKING OF BOTTLES

The vacuum bottle stopper can be used on wine bottles or vegetable oil bottles,
for example. Thus you can easily preserve the aroma and freshness of any liquid.
Caution: Do not use the vacuum packing bottle stoppers for very thin glass bot-
tles, for crystal, plastic or aluminium bottles or for damaged bottles.
Please do not vacuum pack any carbonated liquids. These liquids must be pre-
served under pressure. Vacuum packing causes them to lose the carbonation.
1. Prepare the
described in the section „Prepar-
ing the appliance for operation".
2. Insert the bottle stopper into the
opening of the bottle. There must
be at least 2.5 cm of air between
the liquid in the bottle and the
lower edge of the vacuum packing
bottle stopper.
3. Insert one end of the hose
included with your vacuum pack-
ing machine into the connection
on the appliance and the other
Opening the vacuum packed bottles
If you wish to open a vacuum packed bottle, simply pull the stopper out of the
bottle.
appliance as
Copyright UNOLD AG | www.unold.de
8. The vacuum packing process is
completed and the food in the
container is vacuum packed.
end into the hole in the vacuum
packing bottle stopper.
4. Press the „Vac/Seal" button. The
indicator light shows that the
appliance is in operation.
5. Remove the hose from the appli-
ance and from the vacuum pack-
ing bottle stopper.
6. The vacuum packing process is
now completed.
7. If you want to interrupt the pro-
cess, press the button „Vacuum
and seal" again.
35