Nuna Stokke PIPA Manual Del Usuario página 22

4. Gently guide child's arms through harness loops.
Insert buckle tonges into buckle. Listen for clicks.
Pull on buckle to verify it is latched.
5. Snap the chest clip together and temporarily slide
towards buckle for tightening of harness.
6. Tighten harness by pulling on the adjuster strap. Pull
any excess harness webbing through the buckle towards
the child's shoulder and pull on the adjuster strap. This
may need to be repeated several times for proper fit.
7. Verify that the harness is snug around the child's
waist and shoulders.
8. Position the chest clip so it is at child's armpit level.
9. Check that child is secure:
a) Buckle is fastened.
b) Harness straps are not twisted.
c) Harness is snug – A snug harness
cannot be pinched, and should not
allow any slack.
d) Chest clip is level with armpits.
EN
22
click
Stokke® PIPA™ by Nuna®
click