Idiomas disponibles
Idiomas disponibles
· Make sure the dimension of opening for the appliance is 595mm long and 435mm high.
· Make sure the distance between the appliance and the wall is more than 100mm
· Make sure the distance between the appliance and two sides, top of the mantel is more than
100mm.
· Plug in the appliance and push the appliance slowly into the mantel.
Manual Operation
· The switches located at the front right hand side above the fire .The standby switch must be
first switch on.
· Press once the ―F‖ button to turn on the appliance and flame effect. A red indicator light will
appear to indicate that the function is ON. Press the ―F‖ button for 3 seconds this will operate
the dimmer mode.
· Press the 1000W button once for the low heat settings; press twice to switch off the heat
setting.
· Press the 2000W button once for the high heat settings; press twice to switch off the heat
setting.
Remote Operation
· The standby switch located at the front right hand side above the fire must be first switch on..
· It takes some time for the receiver to respond to the transmitter. Do not PRESS the buttons
more than once within two seconds for correct operation.
· Press the button
effect.
· Press the 1000W button once for the low heat settings; press twice to switch off the heat
setting.
· Press the 2000W button once for the high heat settings; press twice to switch off the heat
setting.
· Press the DIMMER button for operate the dimmer mode.
Safety Cut-Off
once on the remote control this turns ON/OFF the appliance and flame
44
