Unit Assembly; Instructions For Ceiling Installation; Instructions For Installation On A Support Structure - Modine ECO ICN Serie Manual De Uso

9.3.1 - Unit assembly

The unit can be fitted to the ceiling (see image A) or to the support structure (see image B).
The unit, once it has been removed from the crate it is packed in, is transported to the point of installation and
lifted with a forklift.
It is up to the installer to use a forklift with suitable weight and lifting capacity.
The unit should always be forked and raised taking into account its centre of gravity.
A
A
Image A - Ceiling mount
B

9.3.2 - Instructions for ceiling installation

1. Remove package lid before lifting unit to ceiling.
2. Predispose fastening rods to ceiling.
3. Lift packaged unit to ceiling.
4. Fasten model to fastening rods.
5. Unfasten pallet's screws and slip off empty packaging.
6. Tighten fastening screws "A" of unit to ceiling.
B
Image B - Mount on a support structure

9.3.3 - Instructions for installation on a support structure

1 Remove package before lifting unit.
2 Set up support structure.
3 Lift the model and put on the support structure.
4 Fasten model to fastening rods.
Attention
67
www.modine.com