Safety And Responsibility; Intended Use; Safety Information; Transport And Storage - GF DIASTAR Serie Manual Instrucciones

Safety and responsibility

2 Safety and responsibility
2.1

Intended use

The diaphragm valves with DIASTAR actuator are intended exclusively for shutting
off and conveying media in the allowable pressure and temperature range or for
controlling flow in piping systems into which they have been installed. The valve is
intended to be used within the chemical resistance of the valve and all components
involved.
2.2

Safety information

In order to provide safety in the plant, the operator is responsible for the following
measures:
 Products may only be used for its intended use, see intended use.
 Never use a damaged or defective product. Immediately sort out damaged
product.
 Make sure that the piping system has been installed professionally and serviced
regularly.
 Products and equipment shall only be installed by persons who have the
required training, knowledge or experience.
 Regularly train personnel in all relevant questions regarding locally applicable
regulations regarding safety at work, environmental protection especially for
pressurised pipes.
The personnel is responsible for the following measures:
 Know, understand and observe the instruction manual and the advices therein.
3

Transport and storage

 Transport and/or store product in unopened original packaging.
 Protect product from dust, dirt, dampness as well as thermal and UV radiation.
 Make sure that the product has not been damaged neither by mechanical nor
thermal influences.
 Check product for transport damages prior to the installation.
Instruction Manual
35