D-Link DCS-6004L Guía De Instalación Rápida página 7

TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I CONNECT MY CAMERA USING WPS? (DCS-6005L ONLY)
We recommend that you use either the Zero Configuration or Setup Wizard method described earlier
in this guide as they will automatically configure your camera for your wireless network.
If you wish to use WPS to connect your camera, follow these steps:
• Press and hold the WPS button on the back of the camera for 5 seconds. The blue WPS status
LED will blink.
• Press the WPS button on your wireless router or access point within 60 seconds. On some
routers, you may need to log into the web interface and then click an onscreen button to
activate the WPS feature. If you are not sure where the WPS button is on your router or access
point, please refer to your router's user manual.
DCS-6004L / DCS-6005L
7