Seko PROMAX Manual De Instrucciones página 5

ProMax – Proportioning System
INSTALLATION OF A SINGLE UNIT :
Step 1
Use the bracket as a template to
mark the mounting hole pattern.
Drill the hole for the supplied ¼"
anchors and secure the bracket
with the three supplied screws.
Step 4
Slide in the discharge hose (6.5ft or "S" tube) over the
barbed fitting securing it into place
ProMax
Step 2
Attach the system to the bracket
and slide it down...
Cod. 0000137667
Step 3
....until the top tab clicks in place
securing the system to the bracket
Step 5
Connect the water inlet supply hose land tighten
firmly with pliers.
rev. 1.5 EN 3